We recommend spraying the adhesion glue evenly on the glass before starting the print.
- Dirty glass will result in poor bed adhesion.
- An overly clean glass surface creates excessively strong adhesion, which may cause damage to the glass plate.
¶ 1. Spray Adhesion
¶ 1.1 Check the status of the build plate
New 3D printers do not have such problems and can be ignored.
¶ 1.2 Clean the build plate surface
If there is no oil, heavy dust or glue residue on the surface of the build plate, please clean the plate with non-woven fabrics and pure alcohol.
New 3D printers do not have such problems and can be ignored.
¶ 1.3 Spray
Spray evenly on the build plate as what the video shows. ↑
Coat the right-nether corner of the build plate
Please remember to coat the glue on the red marked area, because the printhead will do pre-extrusion in this area.
¶ 2. Liquid Acrylic Dedicated Glue
If you want to fabricate channel letters using liquid acrylic craft, it means you will move the build plate into a curing machine without removing the 3D printed channel letters from the plate.
To make it easier to remove the letters after curing the liquid acrylic, we provide a dedicated glue for this craft.
¶ 2.1 Prepare
¶ 2.2 Apply the glue
Coat the glue evenly on the build plate. ↑
Coat the right-nether corner of the build plate
Please remember to coat the glue on the red marked area, because the printhead will do pre-extrusion in this area.