¶ Unbox
¶ 1.1 Remove the screws
Remove the screws around the bottom of the wooden box.
¶ 1.2 Lift the cover
Lift and remove the wooden cover.
You will see the printer and accessories on the tray.
¶ 1.3 Remove the fixing irons
Tool: an M6 hex wrench
Remove the four fixing angle irons (marked with blue circles) on both sides of the machine with a hex wrench.
Please keep the four angle irons in case you might need secondary packing.
 |
 |
¶ 1.4 Remove the wrapping film
Tool: a knife or scissors
|
|
¶ 1.5 Remove the nylon cable ties
Remove the two nylon cable ties.
 |
 |
Please note that the cable ties are reusable.
You can unlace them by pinching the small escapements.
¶ 1.6 Remove the build plate fixing tapes
 |
 |